WeatherBond PRO TPO Adhesives and Sealants



WeatherBond PRO TPO Bonding Adhesive is a high strength solvent-based contact adhesive that allows bonding of WeatherBond PRO TPO membrane to various porous and non-porous substrates.  Coverage Rate:  60 square feet /gallon
Low VOC Bonding Adhesive is a high-strength, solvent-based contact adhesive used to bond WeatherBond EPDM and TPO membranes to various porous and non-porous substrates.  This product also meets the <250 gpl VOC Content requirements of the OTC Model Rule for SIngle-Ply Roofing Adhesives.  Coverage Rate:  60 square feet/gallon
TPO Primer is designed to prepare TPO membrane surfaces prior to the application of pressure-sensitive products.  Coverage Rate:  200 to 250 square feet/gallon
Low VOC TPO Primer is a low solids, clear (translucent) solvent-based primer used to prepare TPO membrane for adhesion of pressure sensitive products.  This low VOC product is ideal for use in states where environmental issues are a concern.  Coverage Rate: 200 to 250 square feet/gallon
Cut Edge Sealant is a free flowing polymeric material designed for sealing cut edges (exposed fabric) of WeatherBond PRO reinforced TPO membrane.   Coverage Rate:  225' to 275' per bottle (1/8" bead)
AquaBase 120 Adhesive is a unique, semi pressure-sensitive water-based bonding adhesive for WeatherBond membranes offering superior peel strengths without V.O.C.'s or strong odors. The coverage rate is 120 sq.ft. per gallon.
Weathered Membrane Cleaner is used to clean in-service membrane that has been exposed to the weather. It helps to loosen and remove dirt and other contaminants from the surface of the membrane and leaves a suitable surface for seaming and the subsequent application of Primer.  Coverage Rate:  400 square feet/gallon
Thermoplastic One Part Sealant is a single component moisture curing, elastomeric polyether sealant that is compatible with WeatherBond PRO's TPO membranes. The material is designed to provide a flexible, durable and long lasting seal around hard to-flash penetrations in Thermoplastic Roofing Systems.  Coverage Rate:  122 cubic inches/.5 gallon pouch
1168 Low VOC Bonding Adhesive is a high-strength, solvent-based contact adhesive used to bond WeatherBond EPDM and TPO membranes to various porous and non-porous substrates.  This product also meets the <250 gpl VOC Content requirements of the OTC Model Rule for SIngle-Ply Roofing Adhesives.  Coverage Rate:  60 square feet/gallon
Universal Single Ply Sealant is a 100% solids, solvent free, one part, polyether sealant.  Universal Single Ply Sealant can be used as a termination bar sealant for WeatherBond PRO TPO Fully Adhered and Mechanically Attached and WeatherBond RBR Fully Adhered Systems.  Coverage Rate:  25 feet/tube (1/2" bead)
Stay Connected
Contact WeatherBond
  • Email WeatherBond
  •  
  • P.O. Box 251
  • Plainfield, PA 17081
  •  
  • TEL: 866.471.5125
  • FAX: 717.960.4034