WeatherBond PRO Weld-Free TPO Adhesives and Sealants



WeatherBond PRO TPO Bonding Adhesive is a high strength solvent-based contact adhesive that allows bonding of WeatherBond PRO TPO membrane to various porous and non-porous substrates.  Coverage Rate:  60 square feet/gallon
Low VOC Bonding Adhesive is a high-strength, solvent-based contact adhesive used to bond WeatherBond TPO membranes to various porous and non-porous substrates.  This product also meets the <250 gpl VOC content requirements of the OTC Model Rule for Single-Ply Roofing Adhesives.  Coverage Rate:  60 square feet/gallon
TPO Primer is designed for preparing TPO membrane surfaces prior to the application of pressure-sensitive products. Coverage Rate:  200 to 250 square feet/gallon
Low VOC TPO Primer is a low solids, clear (translucent) solvent-based primer used to prepare TPO membrane for adhesion of pressure sensitive products.  This low VOC product is ideal for use in states where environmental issues are a concern.  Coverage Rate: 200 to 250 square feet/gallon
Cut Edge Sealant is a free flowing polymeric material designed for sealing cut edges (exposed fabric) of WeatherBond PRO reinforced TPO membrane.  Coverage Rate:  225' to 275' per bottle (1/8" bead)
AquaBase 120 Adhesive is a unique, semi pressure-sensitive water-based bonding adhesive for WeatherBond membranes offering superior peel strengths without V.O.C.'s or strong odors. Coverage Rate:  100 to 120 sq.ft. per gallon when used as a 2-sided contact adhesive.
Weathered Membrane Cleaner is used to clean in-service membrane that has been exposed to the weather. It helps to loosen and remove dirt and other contaminants from the surface of the membrane and leaves a suitable surface for seaming and the subsequent application of Primer.:  Coverage Rate:  400 square feet/gallon
Thermoplastic One Part Sealant is a single component moisture curing, elastomeric polyether sealant that is compatible with WeatherBond PRO's TPO membranes. The material is designed to provide a flexible, durable and long lasting seal around hard to-flash penetrations in Thermoplastic Roofing Systems.  Coverage Rate:  122 cubic inches/.5 gallon pouch
1168 Low VOC Bonding Adhesive is a high-strength, solvent-based contact adhesive used to bond WeatherBond EPDM and TPO membranes to various porous and non-porous substrates.  This product also meets the <250 gpl VOC Content requirements of the OTC Model Rule for SIngle-Ply Roofing Adhesives.  Coverage Rate:  60 square feet/gallon
Universal Single Ply Sealant is a 100% solids, solvent free, one part, polyether sealant.  Universal Single Ply Sealant can be used as a termination bar sealant for WeatherBond PRO TPO Fully Adhered and Mechanically Attached and WeatherBond RBR Fully Adhered Systems.  Coverage Rate:  25 feet/tube (1/2" bead)
Stay Connected
Contact WeatherBond
  • Email WeatherBond
  •  
  • P.O. Box 251
  • Plainfield, PA 17081
  •  
  • TEL: 866.471.5125
  • FAX: 717.960.4034